The Gizzu 12V 7Ah Lithium-Iron Phosphate (LiFePO4) Battery makes for a great replacement solution for devices or machines that are typically powered by lead batteries such as gate motors, alarm systems, electric fences & CCTV. With its ultra-safe battery management system, this Lithium-Iron Phosphate (LiFePO4) battery lasts up to 10x longer than a typical lead acid battery and can also handle higher currents. It does not produce fumes nor does it leak, allowing you to mount the battery in any position. Don’t find yourself replacing batteries annually but rather invest in a Gizzu 12V 7Ah Lithium-Iron Phosphate (LiFePO4) Battery for long-term peace of mind. Please note: Only use this battery inside a UPS if the UPS low voltage disconnect can be set to 12V, or if you are sure the UPS will last longer than the time you are going to be without power. Otherwise, if the UPS is run until it stops working (battery voltage is too low and BMS low voltage protection will be triggered) then the UPS will not turn on when the power comes on. The battery BMS needs a charge to wake up and the UPS won’t turn on and charge it without a battery being detected. FEATURES: Lasts Up To 10x Longer Than Typical Lead Acid Battery Lithium-Iron Phosphate (LiFePO4) Battery Technology Integrated Battery Management System Water & Dust Resistant (IP55) Sealed & Non-Liquid (No Leaking or Fumes) Mount In Any Position Highly Durable Sealed Plastic Enclosure SPECIFICATIONS: Max Charge Current: 7Ah Standard Voltage: 12.8V (89.6Wh) Constant Discharge Current: 10A Battery Life Cycle: 2500 Charge Current: Normal Charging Current: 3A, Max Charging Current: 7A Operating Temperature: 0~60 C Protection Features: Short-Circuit & Over-Current Protection, Over-Voltage & Under-Voltage Protection Product Dimensions: 15.1 x 6.5 x 9.7 cm Product Weight: 850g WHAT’S IN THE BOX: Gizzu 12V 7Ah Lithium-Iron Phosphate (LiFePO4) Battery – Black x1 User Manual x1 Warranty: 12 Months   https://www.techcollective.co.za/collections/gizzu

Read more less

Warranty: 12 Months The Gizzu 30W Mini DC 38Wh UPS is simple to install and allows you to power various devices during a power outage. With multiple-voltage DC outputs, this UPS can charge mobile devices such as cell phones and tablets via USB. It also features 10400mAh of high-capacity lithium-ion batteries with safety protocols such as over-charge, over-discharge, and short circuit protection. Warning: Please ensure that the combined power draw of connected devices does not exceed 30W. Ensure the voltage of the device is connected to the correct voltage output before turning the UPS on. Failure to adhere to this warning may result in damage to the connected devices. Refer to your manual for additional safety information. FEATURES: Power your Router and ONU (Optical Network Unit) during power outages Keep your mobile devices charged with the USB port 38Wh High-capacity lithium-ion batteries Power your CCTV cameras Compatible with a wide range of devices Intelligent protective design with over-charge, over-discharge, and short-circuit protection SPECIFICATIONS: Input Voltage: 100 – 240V AC DC Output Voltage: 5V+USB x1 (2A), 1 x 9V/12V (selectable)(2A), 4 x 12V (2A) Power Output: 30W Battery Capacity: 10400mAh Battery Information: 2600mAh x 4 (Lithium-ion) Total Watt Hours: 38Wh Estimated Run Time: ONU (3W): 12.6hrs, Router (10W): 3.8hrs, CCTV Cameras (10W): 3.8hrs Product Dimensions: 18.6 x 11 x 3.3 cm Product Weight: 450g WHAT’S IN THE BOX: Gizzu 30W Mini DC 38Wh UPS – Black x1 1m AC Power Cable x1 1m 2.5mm DC Power Cable x2 30cm DC Splitter Cable x1 5.5×2.1mm DC Adapter x1 4×1.7mm DC Adapter x1 3.5×1.35mm DC Adapter x1 User Manual x1https://www.techcollective.co.za/collections/gizzu

Read more less

Wireless Smartphone Charger (Qi 15000 mAh) Stay powered on the go with the Wireless Smartphone Charger, equipped with a 15000 mAh battery and Qi wireless charging technology. This versatile power bank allows you to charge your Qi-enabled devices wirelessly while offering additional ports for charging other devices simultaneously. With its sleek design and digital display, you can easily monitor the battery level, ensuring you never run out of power. Whether you're traveling or just need extra battery life throughout the day, this wireless charger is the perfect companion. Main Features Wireless Charging: Qi-compatible surface for cable-free charging of smartphones and other devices. High Capacity: 15000 mAh battery provides multiple charges for your devices. Digital Display: Easily check the remaining battery life with the built-in display. Multiple Outputs: Charge multiple devices simultaneously via wireless and wired connections. Sleek Design: Compact and portable, perfect for travel or everyday use. Technical Specifications Capacity: 15000 mAh Wireless Charging: Qi standard Input: Micro USB/USB-C Output: USB-A, USB-C, Wireless Qi Digital Display: Battery percentage indicator Compatibility: Qi-enabled smartphones, tablets, and other devices What’s in the Box? Wireless Smartphone Charger (Qi 15000 mAh) Charging Cable (USB-C) User Manual

Read more less

Rct Megapower 2kva inverter trolley MCU intelligent control Pure sine wave AC 5VDC USB output 12VDC output Charge from mains Overcharge protection 1 Year Warranty Important Note:  This product is fitted with batteries that are rated for 150-200 use cycles (charges & discharges). It is also advised that batteries are fully charged before the next use cycle, which can take up to 12 hours. Batteries should never be depleted below 50% of their capacity during a use cycle. This product is ideal for stage 1 & stage 2-load shedding. During constant stage 4 - 6 load shedding, battery performance may decrease within a few months so it is advisable to keep the product switched off during this heavy load shedding periods, as a full recharge is not possible to achieve. Please consider products with Lithium batteries that offer 2000+ use cycles and can be fully depleted during every use. Batteries are not covered by the product warranty.  Rct Megapower 2kva/2000w Inverter Trolley with 2 X 100ah Battery Rct Mp-T2000s Pure Sinewave For Sensitive Electronics & Motorized Loads Microprocessor Control Optimizes Reliability Input Power Factor Correction Output Power Factor 1.0 Comprehensive Display Allows Easy Monitoring & Access Of Ups Status Built-In Mppt Solar Charger 2 X Usb 5 V Dc Output And 2 X 12 V Dc Output Battery Cut Off Switch For Safety Pre-Installed Batteries Specifications Rated Power: 2000 W Output Voltage: 220 Vac Output Frequency: 50 / 60 Hz Output Waveform: Pure Sine Wave Solar Input Maximum Photovoltaic Voltage (Vdc): ? 150 V Charge Voltage (Vdc): 35 V - 150 V Rated Charge Current (A): Mppt 30 A Maximum Power (Wp): 800 Wp Voltage Overcharge Protection (Vdc): 28.4 V Voltage Overcharge Recovery (Vdc): 28.0 V Voltage Of Floating Charge (Vdc): 27.4 V Output Ac Output: 2 X Sa 3 Pin Socket - 230 V 50 Hz, 2000 Va / 2000 W Max. (Combined) Usb Output: 2 X Usb Type A Port - 5 Vdc 2 A Max. Dc Output: 2 X 12 V Dc Port 2 A Max. Battery Type: 1 X 12 Dc 100 Ah Deep Cycle Vrla Gel Battery What's in the box1 x RCT MP-T2000S Pre-installed Batteries   General Specifications Maximum Discharge Temperature 50 °C AC Output 2400W AC Output Sockets 5 Wall Charging Time 10 h Life Cycles 1400 Solar Charging Time 4 h DC Output Sockets 2 Output Waveform Sine Wave Max Charging Current 220 VAC Charge Current: 15A Max Boxed Dimensions Height 63.2 cm Width 46 cm Gross Weight 80 kg Net Weight 75 kg Length / Depth 51.5 cm Product Dimensions Product Height 58.5 cm Product Width 38 cm Product Length / Depth 53.9 cm Battery Battery Capacity (Amp-Hour) 100AH Battery Capacity (Watt Hours) 1200 Wh Battery Technology Gel Batteries Included

Read more less

Important Note:  This product is fitted with batteries that are rated for 150-200 use cycles (charges & discharges). It is also advised that batteries are fully charged before the next use cycle, which can take up to 12 hours. Batteries should never be depleted below 50% of their capacity during a use cycle. This product is ideal for stage 1 & stage 2 load shedding. During constant stage 4 - 6 load shedding, battery performance may decrease within a few months so it is advisable to keep the product switched off during these heavy load shedding periods as a full recharge is not possible to achieve. Please consider products with Lithium batteries that offer 2000+ use cycles and can be fully depleted during every use.   Batteries are not covered by the product warranty. RCT MegaPower 1KVA/1000W Inverter Trolley With 1 x 100AH Battery RCT MP-T1000S Pure Sinewave for Sensitive Electronics & Motorized LoadsMicroprocessor Control Optimizes ReliabilityInput Power Factor CorrectionOutput Power Factor 1.0Comprehensive Display Allows Easy Monitoring & Access of UPS StatusBuilt-in MPPT solar charger2 x USB 5 V DC output and 2 x 12 V DC outputBattery cut off switch for safetyPre-installed batteries SpecificationsRATED POWER: 1000 WOUTPUT VOLTAGE: 220 VACOUTPUT FREQUENCY: 50 / 60 HzOUTPUT WAVEFORM: Pure Sine Wave SOLAR INPUTMAXIMUM PHOTOVOLTAICVOLTAGE (VDC): ? 25 VCHARGE VOLTAGE (VDC): 10 V - 25 VRATED CHARGE CURRENT (A): 30 AMAXIMUM POWER (Wp): 360 WpVOLTAGE OVERCHARGE PROTECTION(VDC): 14.2 VVOLTAGE OVERCHARGE RECOVERY(VDC): 14.0 VVOLTAGE OF FLOATING CHARGE (VDC):13.7 V OUTPUTAC OUTPUT:2 x SA 3 Pin Socket - 230 V 50 Hz,1000 VA / 1000 W Max. (Combined)USB OUTPUT:2 x USB Type A Port - 5 VDC 2 A Max.DC OUTPUT:2 x 12 V DC Port 2 A Max.BATTERY TYPE:1 x 12 DC 100 AH Deep CycleVRLA Gel Battery Ports and Interfaces1. AC Output2. Smart Cooling Fan3. AC Input4. Solar PV Input5. Battery Extension6. Battery Switch7. Led Indicator8. LCD Display9. Function Buttons10. On / Off Buttons11. 5VDC Output12. 12VDC Output13. DC Output Switch What’s in the box 1 x RCT MP-T1000S

Read more less

RCT Megapower 80000mAh AC Power Bank Power up your devices with the RCT 54k & 80k AC Mega Power Bank. If you are looking for an extra power boost for your electronic devices then you should certainly consider buying this mega power bank. It can charge quite a few devices all at once or individually. These include : Notebooks/laptops, smartphones/tablets, TV’s/monitors, Wifi routers/ modems and lamps amongs others. It is certainly a power back up device to consider. It comes with a 54 K , 80 K and 160 K power difference which essentially allows you to have a choice of different power outputs that are determined by your needs. It is completely safe to use and surely will last you for a while until the electricity powers back up again. Features Portable compatible AC power supply Completely silent operation Can be used for camping and outdoor events Ideal for loadshedding Supports USB : Type A and C Supports multiple devices: Notebook, Smartphones, TV’s, Monitors and more. Universal AC output socket Can Last up to 16 hours (Wifi Router),10 hours ( 32″ TV) and 8 hours ( PC Notebook) depending on device. Specifications Universal AC Output socket up to 200 W 96 W charger for 160K and 48W charger for 80K and 54K. Charging Unit : (Input) : 100-240V AC , Output Voltage 50/60 Hz, 24 DC, 4.0A.                         (Output) : 2 x 230V AC socket: 200W Total, 2 x USB Type A PORT 5V DC: 3.4A Total, 1 x USB Type C PD Port : up to 65W MP-PBS54AC : BATTERY RATINGS: 53600mAH, 3.4V DC, EFFECTIVE CAPACITY: 160 Wh, CHARGE TIME: 6 Hours MP-PBS80AC : BATTERY RATINGS: 80000mAH, 3.6V DC, EFFECTIVE CAPACITY: 288 Wh CHARGE TIME: 8 Hours MP-PBS160AC : BATTERY RATINGS: 160000mAh, 3.6V DC, EFFECTIVE CAPACITY: 576Wh, CHARGE TIME : 12 Hours PRODUCT DIMENSIONS & WEIGHT :(220 x 160 x 53mm & 1.42kg) 257 x 160 x 54.2mm & 1.88kg (257 x 160 x 92mm & 3.19kg)

Read more less

The Gizzu Everglow Rechargeable Emergency LED Bulb is an ideal solution for keeping the lights on during loadshedding. The 9W lightbulb features a 27mm Edison light fixture and gives off a warm white colour when lit. Its 1800mAh built-in battery allows it to stay powered during loadshedding. The light bulb takes around 5 hours to fully charge to 100% and can easily be charged by simply leaving the light turned on when there’s no loadshedding. If your light is turned on and a power outage or loadshedding occurs, then the light bulb goes into emergency mode, changing to a cool white colour. While in emergency mode, the brightness can be manually adjusted between three pre-configured settings and can sustain up to 5 hours of additional use during loadshedding, depending on the brightness level. The brightness can be adjusted by turning the light on and off in 1-second intervals multiple times. Each time this is done the brightness will switch between 25%, 50%, and 100%. Leaving the lightbulb off for a while will reset the brightness setting back to its default 100% brightness. Smart Bulb Technology enables the bulb to determine if there is a power failure as opposed to the light switch being turned off. If the light switch is on and the power fails, the bulb activates emergency mode and switches from Warm White to Cool White. If the light switch is off when the power fails the light will remain off unless turned on at the switch. Please note this light bulb only comes in an A70 size (70mm widest diameter and 133mm height), so please check ceiling light cover dimensions to ensure that it will fit when switching out any standard A60 size bulb (60mm diameter). This light features preset brightness levels that are selectable only in emergency mode and is not compatible with dimmable light switches. FEATURES: Keep your lights powered for up to 5 additional hours during loadshedding or power failures Automatically switches to emergency mode in the event of a loadshedding or a power failure The 9W light bulb generates 810 Lumens of warm white light, switching to 450 Lumens of cool white in emergency mode Adjust battery life by selecting between 3 brightness settings in emergency mode Compatible with standard 27mm E27 Edison light fixtures Up to 25000-hour lifespan Smart Bulb Technology SPECIFICATIONS: Base Type: E27 Bulb Colour: Warm White Rated Power: 9W Input Voltage: 230V Input Frequency: 50/60Hz Rated Lumens Normal (Brightness): 810lm +/-10% (100%) Rated Lumens Emergency (Brightness): 450lm (100%)/230lm (50%)/120lm (25%) Battery Capacity: 1800mAh Dimmable Brightness Levels: (100%/ 50%/ 25%) Illumination Time (Brightness): 1.5 hours (100%) /3 hours (50%)/ 5 hours (25%) Charging Time: 5 Hours Lifespan: 25000 hours Colour Temperature (Normal): 3000K Colour Temperature (Emergency): 6500K Colour Rendering Index: >80 Product Dimensions: 7 x 7 x 13.3 cm Product Weight: 78g WHAT’S IN THE BOX: Gizzu Everglow Rechargeable Emergency LED Bulb – Warm White x1 User Manual x1 Warranty: 12 Months   https://www.techcollective.co.za/collections/gizzu

Read more less

The Gizzu 10W Solar Lighting Kit has a compact design and provides a fully off-the-grid capable power solution, which can be used almost anywhere. It operates as a great lighting solution thanks to the 3 LED lamps, but it can also be used to charge your mobile devices when your power source is interrupted or non-existent. Not only does it offer a multi-protection function which allows you to stay safe, but there is also a built-in protection that guards against overcharge, over-discharge, overcurrent, short circuit and PV polarity reverse connection. Its intuitive LED indicating function provides indicators for solar charging, battery power and load status. In the box you will get the Gizzu Solar Panel Battery Unit itself,  1x 10W Solar Panel with 8M PV cable, 3x 2W LED lamps and a 5-in-1 USB cable. FEATURES: 3x 2W LED lamp 5V USB to charge mobile devices Off-the-grid capability (100% solar charge) Highly efficient polycrystalline silicon solar panels Long battery life cycle SPECIFICATIONS: Charging Time: 5 Hours Battery Capacity: 4Ah/12.8Vdc (51.2Wh) Working Hours: 8hrs for 3x 2W LED Lamps PV Module Type: Polycrystalline Silicon PV Max Power: 10W PV Voltage: 18V Battery Charging Voltage: 14.3V Battery Cycle Performance: 1000 LED Indicators: Solar charging, battery power and load status Lamp Power: 2W Protection Features: Overcharge Protection, Over-discharge Protection, Overcurrent Protection, Short circuit Protection, PV Polarity Reverse Connection Protection Product Dimensions: 93 x 69 x 197 cm Product Weight: 1600g WHAT’S IN THE BOX: Gizzu Solar Panel Battery Unit x1 10W Solar Panel with 8M PV Cable x1 2W LED Lamp x3 LED Lamp Cables x3 5-in-1 USB Cable x1 User Manual x1 Warranty: 24 Months https://www.techcollective.co.za/collections/gizzu

Read more less

Free from the restrictions of power cords and plug sockets, the Xiaomi Smart Standing Fan 2 Pro provides a refreshing natural breeze whenever and wherever you need it. The built-in 33.6Wh lithium-ion battery pack and 12V low voltage design will ensure you can enjoy the cool breeze even during an unexpected power outage. Its adjustable wide-angle ventilation offers airflow for up to a maximum distance of 14 metres, letting you cool the whole room more efficiently. Compared with traditional fan blades, the 7+5 double-layer wing-shaped blade of Xiaomi Smart Standing Fan 2 Pro can generate a much softer breeze for your comfort. The inner-layer and outer-layer fan blades each generate airflow at a different speed, which effectively eliminates any air vortex, resulting in a wider, softer and more comfortable natural breeze. The design of double-layer fan blades enables the inner-layer blades to disrupt the focused air flow generated by the outer layer blades, making the ventilation wider and more gentle, while bringing you an even better experience than the breeze you find in nature. In addition to the traditional control buttons on the top, the fan supports voice control, letting you remotely control the Fan 2 Pro via the Mi Home/Xiaomi Home app, as well as smart interaction with other Xiaomi smart home devices. For additional protection, the magnetic charging dock is equipped with overcharge protection. This allows it to automatically stop charging once the battery is fully charged. FEATURES: Voice Control – Google Assistant, Mi Home and Alexa Support 7+5 Double-layer Fan Blades BLDC Motor – Reducing Power Consumption 1000 Precise Speed Settings 140° Ultra-wide Horizontal Swing Adjustable Height Charging Indicator Table and Floor – Place it Wherever You Like Ultra-quiet Operation SPECIFICATIONS: Type: Standing Fan Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz Rated Voltage: 12V Rated Power: 24W Noise Emission: ≤58 db(A) Battery Type: Rechargeable Li-ion Battery Battery Capacity: 2800 mAh(33.6 Wh) Limited Charging Voltage: 0.8V Maximum Fan Flow Rate: 20.28 m³/min Fan Power Input: 12.7W Service Value: 1.60(m³/min)/W Maximum Air Velocity: 3.47 meters/sec Measurement Standard for Service Value: EN IEC 60879: 2019 Standby Power Consumption: Without Wi-Fi Connection: 0.216 W With Wi-Fi Connection: 0.391 W Fan Sound Power Level: 56.3 dB(A) Product Dimensions: 34.3 × 33 × 100 cm Product Weight: 3200g WHAT’S IN THE BOX: Xiaomi Smart Standing Fan 2 Pro – White x1 Motor and Upper Stand x1 Lower Stand x1 Fan Base x1 Fan Blade Assembly Knob x1 Rear Grille Knob x1 Allen Key x1 Charging Base x1 Fan Grille Screw x1 User Manual x1 Warranty: 12 months

Read more less

  Enjoy the gentle light of the Mi Bedside Lamp 2 as you curl up with a book and make use of its touch controls for an easy experience that lets you feel right at home. It’s a more pure lighting experience that is brighter, looks better, and is easier than ever to use. It features RGB lighting with a captivating 16 million colours which can be dimmed to set the exact mood that you want. Unlike traditional designs, this second generation lamp uses advanced inversion moulding and an auxiliary heat dissipation design to let the light emanate from the full body of the lamp. This not only fills the whole room with soft light to create a nice, warm atmosphere and light up the room for everyday use but also gives it a modern and elegant look that can be personalized to your tastes. With a brightness level of up to 400 lumens, the Xiaomi Mi Bedside Lamp 2 can easily light up a typical bedroom. At its lowest brightness of just 2 lumens, it can also be a handy nightlight to help put your mind at ease as you sleep. Its multicoloured light is mixed evenly to create the perfect mood for the night. The Xiaomi Bedside Lamp 2 lets you set the right tone with a top-of-the-line bulb combined with dual-layer light mixing technology for a truly unique experience. The Mi Bedside Lamp 2 also supports voice control, allowing you to step right into the age of smart lighting. There’s no need to get out of bed to turn out the lights. Simply turn the light on or off, or adjust the brightness, colour or colour temperature through your Amazon Alexa, Google Assistant, or Apple Homekit. FEATURES: Captivating 16 Million Colours Dimmable Elegant Style Touch Control Design Smart Voice Control Smart App Control SPECIFICATIONS: Luminous Flux: Up to 400 lm Color Temperature: 1700 – 6500 k On/Off: >12500 cycles Rated Input: 220 – 240 V ~ 50/60 Hz, 0.45 A Operating temperature: -10°C ~ 35°C Rated Power: 9 W (Lamp + LED Driver) Service Life: Approx. 25000 hours Bedside Lamp Input: 12 V 0.8 A Wireless connectivity: Wi-Fi IEEE 802.11b/g/n 2.4 GHz Compatibility: Android 4.4, iOS 9.0 or above Dimensions: 15.2 x 15.2 x 25.4 cm WHAT’S IN THE BOX: Xiaomi Mi Bedside Lamp 2 – White x1 Power Adapter x1 User Manual x1 https://www.techcollective.co.za/collections/xiaomi

Read more less

Paint your home with colour with the Xiaomi Mi Smart LED Bulb Essential. It features RGB colour lighting which allows the Mi Smart LED Bulb to provide various colours for any situation. The colours available can vary depending on your mood and the effect you would like to achieve. This unit comes with a colour temperature that can be adjusted to anything in between 1700K to 6500K. It also has a dimmable brightness level from around 80-950 lm so you can adjust it accordingly to your preferences. It features a Wi-Fi network connection so you can easily control the bulb from your smartphone at any time, from anywhere in your home. No additional hub is needed to connect to the Mi Smart LED Bulb via your smartphone, just install the app, connect via Wi-Fi and you are ready to go. It also comes with Smart Voice Control, which allows you to use apps such as Google Assistant or Amazon Alexa to use your voice to either turn the light on or off, or adjust the brightness without lifting a finger. Smart App Control allows you to remotely control the Mi Smart LED Bulb via the Mi Home App on your smartphone. The app gives you many smart function options such as schedules and turns off delay, various scene modes such as reading, baby mode and 25% brightness, etc. The versatile app also allows for the connection of more Smart devices from Xiaomi. FEATURES: Wi-Fi Connection Adjustable Brightness RGB Light Smart Voice Control Energy Efficient & Long Lifespan Smart App Control SPECIFICATIONS: Luminous Flux: Up to 950 lm Colour Temperature: 1700 – 6500K Lamp Fitting: E27 Rated Power: 9W Service Life: Approx. 25,000 hours On/Off: 12500 cycles Rated Input: 110-240 V ~ 50/60Hz 0.07 A Wireless connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz Compatible with: Android 4.4, IOS 9.0 or above Dimensions: 5 x 5 x 12 cm WHAT’S IN THE BOX: Xiaomi Mi Smart LED Bulb Essential – Cool White x1 User Manual x1 https://www.techcollective.co.za/collections/xiaomi

Read more less